How to Create an Easy Dispersion Effect in Photoshop
Giving a subject a dispersion or splatter effect can create an incredibly dynamic image. The best part is, it’s very quick and easy to do with a few Photoshop brushes, but the end result can look very complex as if it took you hours to create. In this tutorial, I’m going to walk you through 3 easy steps to create this dispersion effect.
Here’s a look at what we’ll be creating.
WeGraphics members will want to grab this brush set for the tutorial:
After a little bit of searching I found this photo of a guy jumping in the air by Camera Eye Photography. This is a great photo for this effect because the subject is in motion. So our dispersion effect will help to enhance that motion.
Copy and paste the photo into a new PS document. I sized mine down to 2500px wide. Using the Quick Selection Tool (W), I made a selection of the guy and copied and pasted him to a new layer. I then loaded the selection again, and with the background layer selected, I chose (Edit | Fill | Content Aware).
Content Aware did a pretty good job of removing the guy from the background. There is still a silhouette visible, but that’s okay, we’ll be covering most of it up. We just want some of the background color to show through. If you’re extra picky, you can remove the silhouette with the Clone Stamp Tool (S).
Lets go ahead and duplicate the guy layer one time. So you should have two layers that have our guy jumping. Select the bottom most guy layer and press (Cmd+T) to transform him. You want to stretch the guy horizontally.
I roughly selected his arm and leg and moved them back to the edge of the non-distorted guy in the layer above. The idea here is that we’re giving a color area for our splatters to pick up via a mask.
Lets go ahead and create that mask for the distorted guy layer. Select the distorted guy layer and click the layer mask icon at the bottom of the layers palette. Fill the mask with solid black.
Now use the splatter brushes to reveal portions of the layer by clicking the mask using solid white as the foreground color.
For the top non-distorted guy layer, we also want to create a layer mask. But this time we want to leave it solid white, and use a black splatter brush to remove portions of the guy to reveal some of the background.
Pretty easy, huh?
For the final touches lets add a bit of vignette and highlight. But before we do that… I took one large dark splatter and placed it on a layer behind the guy. I basically just wanted to see some light splatters that fell beyond the distorted guy’s layer mask.
For the vignette, lets switch over to Quick Mask Mode (Q), and choose a very large soft black brush and click once in the center of the image.
Switching out of QMM you’ll see that we have a selection that excludes the very center of the image. The selection is also nicely feathered due to our soft black brush.
Now create a new Levels Adjustment Layer above all other layers, and adjust as follows.
For the final touch, lets add a highlight. Create a new layer above the guy layer, and set its blending mode to Opacity. Now with a soft white brush make 1 or two clicks over the guys head and torso. You may need to reduce the opacity of this layer down to 50% or 60% depending on how hot the highlight appears.
I hope this quick tutorial has inspired some ideas on how to use PS brushes to create interesting dispersion effects in your artwork. Experiment and have fun!